Heavy-duty primary crushing for stumps, large blocks and thick timber.
Stumps and large blocks are fed by grab loader into the round pot crushing chamber, where heavy hammers break them into fragments of several centimeters as a primary crushing stage. A secondary mill then refines the material to finished size — it eats the big, hard material ordinary crushers refuse.
Where this machine fits in a production line:
Don't shop by catalogue capacity alone — confirm these three things first:
Stumps, formwork and thick timber that choke ordinary crushers are its home turf — size by your largest expected piece.
Output is fragments of several centimeters; a secondary mill is needed for finished size — plan both stages together.
Typically fed by grab loader or excavator; confirm the infeed opening size and site lifting conditions in advance.
The questions buyers ask most before choosing a model.
Primary crushing of oversized, hard material: stumps, roots, construction templates and thick boards. Material that chokes a normal crusher feeds easily here.
The round pot crusher is specialized in large, hard pieces with a chamber and tooling designed for big bites; an integrated crusher is better for mixed wood waste. We recommend by your actual feedstock.
It is a primary crusher: output is irregular fragments of several tens of millimeters, refined by a secondary mill to finished size. We plan both stages together.
Typically by grab loader or excavator, with manual assistance to position pieces. The infeed opening is sized for large material.
Real feedback from project sites and follow-up visits.
“The whole line has been running normally in the plant — you can see the output stability with your own eyes.”
“They ran a trial with our material before recommending a model — and talked us out of the wrong one. That earned our trust.”
“Installation to first discharge in three days, with their engineer on site for commissioning.”
Prepare the following before we talk — we can identify the machine and process combination much faster.
Talk to Penghe Machinery directly about your project.
+86 137 8366 8119 ↗Company address & full contact →Tell us your raw material, target capacity and site conditions, and we will discuss a suitable configuration. Final parameters are confirmed in the technical proposal agreed by both parties.
