Turn sorted municipal and industrial solid waste into high-calorific RDF fuel rods.
Pre-crushed, sorted and magnetically separated combustible waste enters the forming chamber, where heavy-duty rollers press it through abrasion-resistant dies, extruding it into dense fuel rods. The chamber and dies are engineered specifically for high-ash, abrasive waste — a job a standard biomass pellet mill cannot do.
Where this machine fits in a production line:
Don't shop by catalogue capacity alone — confirm these three things first:
High-ash, contaminated waste must be crushed, magnetically separated and air-classified first — metal and inorganics destroy dies fast.
Fuel rods sell mainly to cement kilns and power plants, and the price follows calorific value. Lock in the outlet channel before sizing the line.
Dies and rollers are purpose-built for waste duty and are normal consumables — include replacement cycles in the project economics.
| Model | 外形Dimensions(mm) | 主机Power(kW) | 最小生产能力(t/h) | 成型含水率(%) |
|---|---|---|---|---|
| 9JY-2000A | 3000 × 1350 × 1870 | 55 | 1.2–1.5 | 14–25 |
| 9JY-2600 | 3040 × 1400 × 1900 | 75 | 1.5–2.5 | 14–25 |
| 9JY-3500A | 3500 × 1600 × 2200 | 110 | 2.5–3.5 | 14–25 |
| 9JY-4500A | 3550 × 1670 × 2300 | 132 | 3–4.5 | 14–25 |
Catalogue values for reference. Actual output depends on material, moisture and configuration — a trial run with your material settles the real numbers.
The questions buyers ask most before choosing a model.
RDF feedstock is mixed solid waste with high ash and abrasive content. The forming chamber, die material and wear protection are designed for waste — a biomass pellet mill will wear out quickly on this material.
Sorted household waste combustibles, paper-mill rejects, waste plastic and fabric, and aged-refuse oversize can all work — after crushing and sorting to remove metals and inorganics. A trial run is needed to confirm forming performance.
The main outlets are cement kilns as alternative fuel and power plants for co-firing. The achievable price depends on calorific value, so it is wise to secure a downstream buyer before sizing the line.
Typically crushing, magnetic separation/sorting, drying, briquetting and packing. Which stages you need depends on the incoming material and target capacity; a single briquetting machine is also a valid start.
Real feedback from project sites and follow-up visits.
“The whole line has been running normally in the plant — you can see the output stability with your own eyes.”
“They ran a trial with our material before recommending a model — and talked us out of the wrong one. That earned our trust.”
“Installation to first discharge in three days, with their engineer on site for commissioning.”
Prepare the following before we talk — we can identify the machine and process combination much faster.
Talk to Penghe Machinery directly about your project.
+86 137 8366 8119 ↗Company address & full contact →Tell us your raw material, target capacity and site conditions, and we will discuss a suitable configuration. Final parameters are confirmed in the technical proposal agreed by both parties.
